Fine Tool Journal Here comes my RSS info https://finetooljournal.net/ 2020-07-05T13:04:16+01:00 FeedCreator 1.7.3 6904-361 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7692/6904-361 6904-361 LEONARD BAILEY No. 1 spokeshave. Type 3 with "Bailey's Patent" and 1858 patent date cast into underside (worn and faint), proper marked cutter, loop type screw, japanning 50%. Good+ (HNL1078) 60 - 120 6904-357 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7688/6904-357 *6904-357 Coachmaker's rabbeting spokeshave. Unmarked, 16" wide, cuts a 1-1/4" rabbet. Good (TBI373) 30 - 60 6904-248 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7579/6904-248 6904-248 Lot of two spokeshaves. A STANLEY No. 151 adjustable, and a UNION TOOL No. 117 duplex. Both with some cleanable surface rust but complete and working. Good (TBI374) 60 - 120 6904-245 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7576/6904-245 6904-245 Reeding shave. Unmarked and it looks smith made although very well done. 13-1/2" wide, the sole has a tapered fence cast into it with two separate cutters clamped on either side. Fine (JSM080) 50 - 100 6904-243 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7574/6904-243 6904-243 STANLEY No. 56 cooper's shave. Japanning is about 60% but otherwise clean and complete with J mark on cutter. One of Stanley's rarer shaves. Good+ (TBI436) 50 - 100 6904-242 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7573/6904-242 6904-242 Wooden sash shave. Boxwood, 11" across, with two ogee cutters separated by a 1" fence. Unsigned but looks professionally made. Stamped "9/16" although the cutters are 13/16". Cleanable surface dirty, no damage. Good (PLH041X) 50 - 100 6904-222 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7553/6904-222 6904-222 Lot of two wooden spokeshaves. Both unmarked with convex soles, one fixed cutter, the other has an unusual metal adjusting strip. 9" wide with hangholes in arms. Good (TBI340) 30 - 60 6904-057 2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7388/6904-057 6904-057 LEONARD BAILEY patent cooper's spokeshave. The 18" shave that became the Stanley No. 56, but with the earliest form of cutter clamp based on Bailey's 1860 patent (see Lamond, page 140). Proper cutter marked "L. Bailey Boston." Patent date very faintly stamped into arm. Japanning 50%, small splotch of red paint. Good+ (CVR506) 60 - 120 6904-056 2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7387/6904-056 6904-056 Lot of two modern maker spokeshaves. An adjustable No. 151-type shave, marked only "Made in England" so could be RECORD, with a HOCK cutter; and a KUNZ No. 65 chamfer shave. Both very clean. Fine (MDY281) 100 - 200 6803-262 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4419/6803-262 6803-262 Lot of two CINCINNATI TOOL COMPANY spokeshaves. A convex sole one and a flat sole one. Traces of japanning on flat one and someone painted face with silver, 80% japanning on convex one and wood handles with light staining. Some surface rust on both. Good (RRT848) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-261 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4418/6803-261 6803-261 Lot of two double bladed scrapers. An A.A. WOOD No. 2 reversible spokeshave with flat and concave cutters, japanning 40%, the number 2 is cast on one handle, surface rust spots. And a STANLEY No. 60, japanning 95%, sweetheart cutters, clean. Good- better (RRT849) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-260 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4417/6803-260 6803-260 STANLEY No. 83 scraper. Roller looks proper, nickel 85%, handles have light wear and staining, some surface rust on body. Good (CVR406) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-259 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4416/6803-259 6803-259 Lot of two STANLEY No. 66 hand beaders. A Type 1 with 40% japanning and straight fence and one cutter. Other later with 80% nickel plating and also straight fence and one cutter. Good (FNK484,485) 40 - 80 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-258 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4415/6803-258 6803-258 Lot of three shaves. A PRESTON flat bottom with traces of japanning and cleaned, a STEARNS flexible sole with 65% japanning and some light rust, and MARTIN'S convex sole with no japanning and surface rust. Good- better (RRT847) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-257 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4414/6803-257 6803-257 Lot of three spokeshaves. Two STANLEYs, a No. 62 double shave and a No. 54, Type 1. No. 54 has rust and paint spots, traces of japanning, No. 62 has 85% japanning, pitting on top of cutters and one has semicircle mark, grooves in metal around one screw. Plus a MOSHER patent by CRESCENT as seen In Lamond pg 256. Japanning 80%, light surface rust on cutter, cap screw might be replacement. Good- better (WLS239) 40 - 80 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-256 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4413/6803-256 6803-256 STANLEY No. 83 scraper. Roller looks proper, nickel 85%, handles have light wear and staining, cutter a little rusty. Good (TBI528) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-255 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4412/6803-255 6803-255 STANLEY No. 66 hand beader. Nickel plated model with near complete finish. One cutter only, both fences but one is a tad rusty underneath. Good (BKF17) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-254 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4411/6803-254 *6803-254 BRADBURY spokeshave. 13-1/2" wood body with 4" marked blade, wear and a few chips. Good (LHD180) 15 - 30 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-253 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4410/6803-253 *6803-253 Coachmaker's shave. 7" wood handles with cracked brass ferrules, 6" wide cast iron body with flat sole and repurposed early 3" Stanley cutter with semicircle mark. Surface rust, paint on sole. Good- (PLH741) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST.