Fine Tool Journal Here comes my RSS info 1970-01-01T00:00:00+01:00 FeedCreator 1.7.3 7004-184 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/10276/7004-184 7004-184 Small chariot infill plane. 3" sole, 1-1/4" cutter, crack in left cheek and throat widened with some chips. A few dings in metal and wood wedge. Good- 60 - 120 (BFN193) 7004-183 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/10275/7004-183 7004-183 PRESTON No. 1347 bullnose rabbet plane. 3-3/4" sole, 1" cutter. Japanning good, plating 80%, some surface rust, small spot of pitting on one cheek near toe and on one side of lever cap, cutter locking screw looks like a replacement. Good- 60 - 120 (BFN270) 7003-021 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9495/7003-021 7003-021 ERLANDSEN skew rabbet plane. 8-3/4" long by 1" wide with 1-1/4" skewed cutter. Not marked but has the characteristic rabbet escapement, rosewood wedge missing finial, some surface rust and tiny chip at edge of throat. Housed inside what looks like a user made hinged-lid box with green felt lining. Box has a little damage. Good- 150-300 (HNL754) 7003-020 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9494/7003-020 7003-020 Skew cutter chariot plane. Appears to be Irish in style and user made, 7" long and 2-1/8" wide with 1-5/8" skew cutter, wedge looks like rosewood and bun at toe is oak and concave to allow for a thumb to rest inside. Some casting flaws on cheek, crack at throat. Unusual. Good 75-150 (MGE59) 7003-019 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9493/7003-019 7003-019 SPIERS AYR infill rabbet plane. 9" long by 1" wide, ebony fill, Ward cutter, crack at toe and heel, some user stamps. Mild surface rust spots and some pitting on sole. Good 100-200 (PLH2584) 7003-018 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9492/7003-018 7003-018 Infill rabbet plane. Unmarked but looks like a Spiers, 9" long by 3/4" wide, Ibbotson iron, ebony fill ok with one crack at heel, some user stamps. Left cheek has surface rust on majority of it, other side has some spots. Would clean up well. Good 75-150 (HNL869) 7003-017 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9491/7003-017 7003-017 MATHIESON No. 843 infill smoothing plane. Rosewood fill, maker's mark on toe, tote has repaired crack, surface rust mainly on iron, some wear to wood and a few user stamps. Good 80-160 (GAN5736) 7003-016 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9490/7003-016 7003-016 Infill panel plane. User made, 11-7/8" cast gunmetal sole, rosewood infill and wedge, closed tote with reshaped end, 2-1/4" Ward iron with Thos. Ibbotson chipbreaker, infill secured by screw through sole, moderate overall dinging. Good+ 100-200 (CBM915) 7003-015 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9489/7003-015 7003-015 Infill bench plane. Unsigned, cast steel body with 8-3/4" straight sided sole, closed tote with shortened horn, hardwood infill, 2-1/8" Sorby iron. There are a couple of phillips-head screws holding the fill that may be replacements. Good 50-100 (MGE066) 7002-455 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9436/7002-455 7002-455. E.P. PRESTON & SONS bullnose plane. Uncommon Preston bullnose, cast steel body with 3-1/4" sole, rosewood wedge, 1-1/4" Preston iron numbered to the plane and wedge, strike button on heel worn down, some light surface rust and has been polished. Good 100-200 7002-454 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9435/7002-454 7002-454. Infill shoulder plane. User made, cast gunmetal body, 4-1/4" sole, unusual humpback profile, 1/2" unmarked iron, rosewood infill and wedge with a chip, user initials stamped in cheek. Good 60-120 7002-453 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9434/7002-453 7002-453. Reversible block plane. We've seen a couple of these, but don't know who made them. They appear to be English. Similar in function to a Stanley 130 in that the cutter can be reversed to use it as a bullnose. Cast gunmetal with a 5" sole and 1-1/4" cutter, it has a diamond shaped mark in the finger rest but it's hard to make it out. Gunmetal is oxidized and never polished but undamaged, paint splotch on one cheek, cuter is rusted. Good 60-120 7002-452 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9433/7002-452 7002-452. Infill panel plane. User made, cast steel body with 15-3/4" sole, infill is dark rosewood or ebony, closed tote, gunmetal bridge and throat lining, light pitting on both cheeks, 2" iron unmarked and pitted. Good 100-200 7002-451 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9432/7002-451 7002-451. H. SLATER infill shoulder plane. Cast steel body, 7-3/4" x 1-1/2". Lacquered rosewood infill and wedge, some wear but no major damage, user name stamps, I. Sorby iron with an inch left. Slater's name is marked under the heel strike button. Good 60-120 7002-450 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/9302/7002-450 7002-450. Lot of two infill planes. Both unsigned. A bullnose plane, possibly by John Holland. Cast steel, 3-3/4" sole, 1-1/4" unmarked iron, rosewood wedge with some wear but no major chips. Overall surface rust but no deep pitting and would clean up well. And a London style chariot plane, cast gunmetal, stained hardwood bun and wedge, 4-3/4" x 2" sole, iron is marked but hard to make out and slightly spalled. The body has overall dinging and the wood is worn. A project plane that would repay some careful restoration. Good 120-240 7002-020 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8822/7002-020 7002-020. Infill shoulder plane. User made and unsigned, heavy cast gunmetal body with 6" sweated steel sole also secured by a couple of screws, unsigned 3/4" iron, rosewood infill and wedge. Good+ 100-200 7002-019 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8821/7002-019 7002-019. Infill rebate plane. Steel cased 1/2" rebate plane with 9" rosewood infill. It has a maker stamp on the toe but its overstamped and too faint to read; could be Mathieson. Unmarked iron. A couple of user stamps and some modest dinging, largish chip from end of wedge. Good+ 100-200 7002-018 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8820/7002-018 7002-018. Gunmetal infill shoulder plane. User made and unsigned, cast gunmetal body, 7-3/4" x 1-1/2", beech infill, W S & Co. iron. A couple of dings in the wood and one small crack in the body but no major damage. Good+ 100-200 7002-017 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8819/7002-017 7002-017. H. SLATER infill shoulder plane. Cast steel body, 7-3/4" x 1-1/4". Rosewood infill and wedge, some wear and small dents but no major damage, a few user name stamps. Slater's name is marked under the heel strike button. Good+ 150-250 7002-016 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8818/7002-016 7002-016. JOHN HOLLAND infill shoulder plane. Holland was known for his shoulder planes and this is a decent example, gunmetal Yorkshire pattern body with 7-3/4" sweated steel sole, dark rosewood infill with uncommon rhino horn, 1-1/2" original marked iron. Signed on toe and also has user initials. There's a big chip from the wedge, otherwise nice and clean. Good+ 175-275 7002-015 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8817/7002-015 7002-015. Infill bench plane. Unsigned, cast steel body with 8-3/4" straight sided sole, closed tote with shortened horn, hardwood infill, 2-1/8" Sorby iron. There are a couple of phillips-head screws holding the fill that may be replacement. Good 50-100 7002-014 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8816/7002-014 7002-014. Infill bench plane. Unsigned, cast gunmetal body with 7-3/4" coffin shaped sole, mahogany infill, 2-1/4" Ward & Payne iron. User name on toe. Good+ 100-200 7002-013 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8815/7002-013 7002-013. Bullnose infill plane. Cast gunmetal body, unsigned, 3-3/4" x 1-1/4" sole, looks like ebony wedge with chipping at the throat, Preston cutter worn down its last 1/8". Good 60-120 7002-012 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8814/7002-012 7002-012. STEWART SPIERS. Infill bench plane. Dovetailed steel body, 7-1/2" coffin shaped sole, ebony infill, 2" Ward & Payne iron with pitting. Body is oxidized but no pitting, infill very clean. Good+ 200-350 7002-011 1970-01-01T00:00:00+01:00 1970-01-01T00:00:00+01:00 /current-auction/viewbids/8813/7002-011 7002-011. H. SLATER infill bench plane. Cast steel body, 7-3/4" sole with parallel sides, infill and wedge looks like rosewood, 2-1/4" double iron with "Wiefin" mark. Has a gunmetal bridge with Slater's Meredith Street address. Mild overall surface rust, a couple of user stamps, strike button in the heel has been mashed flat. Good 100-200