Fine Tool Journal Here comes my RSS info https://finetooljournal.net/ 2019-03-19T02:43:44+01:00 FeedCreator 1.7.3 6803-328 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4485/6803-328 6803-328 Lot of 4 mortise gauges. Two are STANLEY No. 79 with light wear, and two are unmarked with moderate wear and one has replacement wingnut locking screw, other missing pin in brass plate. Good- better (FNK405, 406, 407, 409) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-327 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4484/6803-327 6803-327 Lot of two LEONHART patent pocket levels. Both marked with 2/27/06 patent dates for Rudolph Leonhart of San Anselmo, CA. Designed to fit in the pocket and be attached to any scrap wood. The plating on both is flaking and a little worn, vials wet. Uncommon. From the John and Janet Wells collection. Good (WLS211) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-326 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4483/6803-326 6803-326 Lot of two figural reversible calipers. One with the toes turned in (7") and one turned out (2-1/2"). The larger one has more surface rust, user initials, and brass surround to hinge. Good better. (TBI485) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-325 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4482/6803-325 6803-325 STANLEY No. 31 angle bisector. Early version with rosewood body and script logo; rosewood has some wear but no major damage, a few flecks of rust and scratching. Good (RRT845) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-324 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4481/6803-324 6803-324 Ebony ultimatum style mortise gauge. Faint partial mark I can't make out, brass plate on head, light toolbox dinging and wear, slight tarnish to brass. Pins ok. Good (UNK) 35 - 70 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-323 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4480/6803-323 6803-323 CULLEN TOOLS Deluxe slitting gauge. Ungraduated stem, brass plated head and knurled locking screw, good point. Clean. Good+ (LHS229) 40 - 80 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-322 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4479/6803-322 6803-322 STANLEY No. 71 double stem gauge. Marked with patent date twice, wear and staining to wood, pins ok. Good- (RSH537) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-321 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4478/6803-321 6803-321 Lot of 4 STANLEY gauges. Two No. 72, a No. 65, and a No. 68. No. 68 and one of the No. 72 have moderate wear and some staining, other two are fairly clean. Points ok, No. 65 has replacement locking thumbscrew. Good (FNK 408,411,413,426) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-320 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4477/6803-320 6803-320 RUNGE patent level. Possibly manufactured by UNION LEVEL, this one is mounted on a board with remnants of the Union label and initials UBA, and UBA also stamped on level above 5/28/18 patent date. Two levels mounted perpendicular on a triangular frame that allows the levels to be adjusted with brass locking screws. Vials wet. Uncommon. Good (RRT838) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-319 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4476/6803-319 *6803-319 Lot of 6 pocket tapes. Three by EVANS and one with leather belt holder, one with SHELL advertisement, other with worn DISSTON logo, and a German one with red push button. Most have light wear. Good (GRN74) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-318 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4475/6803-318 6803-318 Lot of two trammel points. Cast iron ones with 3" wide bodies and 1" points with large locking wingnuts on 23" long keeper bar with hang holes. And steel ones with circular bodies, 4-1/2" long total, one fixed and other slides on iron bar, knurled wheel near fixed point has cracks where bar inserts. Good (RRT) 35 - 70 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-317 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4474/6803-317 *6803-317 Lot of two mortise gauges. Both rosewood with brass plates on heads, one with rather large brass thumbscrews, both with wear to wood but ok points. User names on both. Good (MDY303) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-316 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4473/6803-316 6803-316 JOHNSON CONWAY try square. 18" blade with rosewood handle, decorative inlay, clear maker mark. Wear to wood and blade rusty. Good- (RRT842) 35 - 70 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-315 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4472/6803-315 6803-315 DIETZGEN No. 978A drafting set. Trammel points and compass, clean in velvet lined case. From the John and Janet Wells collection. Good (WLS195) 40 - 80 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-314 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4471/6803-314 *6803-314 SATURN drafting square. Double edged with ruling on two sides, protractor angles in center, designed to fit onto drafting table, pressed steel. A few small rust spots. Good (RRT841) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-303 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4460/6803-303 6803-303 STANLEY No. 200 cutter and chisel grinder. Japanning 95%, a little rust on the roller, otherwise good. Good+ (PNG113) 35 - 70 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-302 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4459/6803-302 *6803-302 Glazer point shooter. Unmarked, spring operated, no japanning, still works and comes with a box of MARKWELL zinc points. Good (FNK634) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-301 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4458/6803-301 *6803-301 J.P. HYDE No. 777 wallpaper trimmer. Plating 80%, cutter sharp. Good (FNK22) 15 - 30 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-300 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4457/6803-300 6803-300 Crane ashtray. Brass ashtray with crane arm that moves 360 degrees and a 4" square tray beneath it. Green plaque on front says "M.S. Kaplan Company, Your Chicago Broker, Scrap Iron." Felt bottom a little worn. Good (PLH158x) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-299 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4456/6803-299 *6803-299 UNION TWIST DRILL CO. bit holder. Metal two-tier holder for machine screw tap drills, rusty eye hook through the middle, some tarnish. No bits so ready to be filled up. Good (RSH553) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-298 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4455/6803-298 6803-298 Leatherworker's vise. Marked "D.R.G.M" so likely German made. Consists of vise with 2-5/8" jaws and 4" long anvil next to it, atop wood screw clamp to attach to a bench. Likely for working parts of bridles and tack for horses. Has some wear and missing bolt and wingnut to keep vise closed, spot of paint on one jaw, otherwise in decent shape. Good (PLH759) 75 - 150 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-297 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4454/6803-297 6803-297 Lot of two tools. On that looks like the Pearson patent automatic nailer but name not cast into handle like the others and marked No. 14B on top, teal paint 75%, some surface rust. And an ACME STAPLE CO. stapler, model 9BC, the predecessor to the staple gun. Some surface rust, still works. Good (ECN190) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-296 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4453/6803-296 6803-296 Bench mounted drill press. Belt operated with metal handle at top to lower three-jaw chuck. Unmarked, japanning 80%, surface rust. Good (PLH766) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-267 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4424/6803-267 6803-267 Eel spear. 20" long handwrought body with 4 spikes, some surface rust, no wood handle. Good (RRT855) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-252 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4409/6803-252 *6803-252 Chisels and bits in handmade wood box. Trifold box has compartments for 3 STANLEY chisels with black plastic handles, and 6 ACRABORE auger bits. Clean. Good (KDL326) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST.