Here comes my RSS info https://finetooljournal.net/ 2020-07-05T13:13:05+01:00 FeedCreator 1.7.3 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7694/6904-363

6904-363 COOK PATENT band saw set. Spring hammer type patented by Roswell F. Cook in Dec. 23, 1873 and typically manufactured by A.E. Cunningham of Worcester, Mass. Cast iron, Has about 80% japanning, works well. Good+ (CVR442) 50 - 100

2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7684/6904-353

*6904-353 MILLERS FALLS No. 10 hacksaw. Good condition with traces of green paint; handle slides to accommodate different length blades. Modern 12" blade. An uncommon saw. Good (GRY038) 15 - 30

2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7507/6904-176

6904-176 STANLEY No. 150 mitre box. Japanning and red highlighting super clean and looks original, complete with all parts, includes an 18-1/2" Disston steel backsaw. Fine (HSS263) 60 - 120

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7434/6904-103

6904-103 GEO. H. BISHOP No. 8 steel backsaw. 10" blade, clear etch, applewood handle with good horns and deep notch. Good+ (CLY360) 80 - 150

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7433/6904-102

6904-102 Early DISSTON No. 7 rip saw. Early version of the saw that was the foundation of the Disston empire, pre-"Son" etch, nib, handle has deep notch, optimistic eagle medallion and split nuts, minor chips from top horn, 28", 6 tpi. It's been sharpened a few times, but plenty of blade left. Good+ (CLY377) 60 - 120

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7432/6904-101

6904-101 ROB'T SORBY brass backsaw. 14" blade, good handle with lamb's tongue, "warranted superior" medallion, split nuts, user name. Sorby's kangaroo mark on back. Good+ (CLY324) 60 - 120

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7431/6904-100

*6904-100 GRIFFIN?S IMPROVED cast iron hacksaw. Patented in 1883 by George Griffin and sold by C.E. Jennings. Herringbone pattern and patented toggle in handle to tighten blade. Unmarked as all are. The toggle is loose. A shorter blade would fix it, or a washer. Good (DLY469) 30 - 60

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7430/6904-099

6904-099 HARVEY W. PEACE "Perfection" panel saw. 20" blade, 11 tpi, cross-cut, etch too faint to read, good medallion, small chip from top horn, complete reinforcing plate marked with Hankin Tenney's patent date. Good+ (CLY485) 60 - 120

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7429/6904-098

6904-098 Lot of two specialized saws. A SIMONDS No. 254 butcher saw, clearly marked on frame, beech handle with thumb rest and one split, 22" blade. Plus an 18" curved floor saw. It has an Atkins medallion but may be user made, the nuts don't match. Good better (HSS249) 50 - 100

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7428/6904-097

6904-097 Bow saw. 20" overall with a 10" blade, marked "T J Hastings" which looks like a maker, probably English, needs a toggle stick. Good (CLY526) 50 - 100

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7383/6904-052

6904-052 I. SORBY brass backsaw. Stamped "Northern Tool Works, Sheffield", which marks it has having been made by Turner, Naylor Co., but without the "Mr. Punch" trademark. 9" blade, open handle, super clean, split nuts. Good+ (CLY364) 70 - 120

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7382/6904-051

6904-051 THOS. TURNER CO. brass backsaw. 8" blade, open handle with split nuts, some light wear and user name but no damage. The mark on the back dates it to the 1850s; see Barley page 594 (bottom). Fine (CLY329) 60 - 120

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7381/6904-050

6904-050 SPEAR JACKSON steel backsaw. 12" blade, good lamb's-tongue handle with split nuts, a little proud of the handle. Good+ (CLY333) 50 - 100

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7380/6904-049

6904-049 Lot of two specialty saws. GOODELL-PRATT hacksaw, top mounted knob and adjustable blade, 19" overall, and HIBBARD, SPENCER AND BARTLET "OVB" (Our Very Best) butcher's saw, 18" blade. Good+ (TBI1058) 40 - 80

2020-05-27T00:00:00+01:00 2020-05-27T00:00:00+01:00 /current-auction/viewbids/7379/6904-048

6904-048 Lot of two Japanese pull saws. One with 14-1/2" blade, one 15-3/4", pointed tangs but no handles, unmarked, very clean. Fine (SCA1148) 50 - 100

2020-02-28T00:00:00+01:00 2020-02-28T00:00:00+01:00 /current-auction/viewbids/7186/6903-272

6903-272 Lot of four saws. A DISSTON D-42 Victory with faint etch, some wear to handle and discoloration on blade, store tag on base of handle. Plus two more DISSTONs with illegible etches but one with thumbhole, wear to handes and light pitting and rust on blades. Plus a PHILADELPHIA SAW CO. with 20" blade and chips on horn. Good- & better (COL301B) 75 - 150 ****Bids with an asterix in front of the lot number have minimum bid of $1, all others have minimum bid of $20. ALL INITIAL BIDS MUST BE PLACED BY END OF DAY SATURDAY, MARCH 21, 2020. Bids may be raised or high bids obtained until 10pm EST Sunday, MARCH 22, 2020 by calling the office at 800-248-8114****

2020-02-28T00:00:00+01:00 2020-02-28T00:00:00+01:00 /current-auction/viewbids/7185/6903-271

6903-271 Lot of six saws. 5 DISSTON including one with a NYCRR etch, two D-8, a D-10, a Rancher, plus a GEO BISHOP No. 50. Most have surface rust and wear or damage to handles. A couple have only a little life left but most have some use left. Good- & better (COL301A) 75 - 150 ****Bids with an asterix in front of the lot number have minimum bid of $1, all others have minimum bid of $20. ALL INITIAL BIDS MUST BE PLACED BY END OF DAY SATURDAY, MARCH 21, 2020. Bids may be raised or high bids obtained until 10pm EST Sunday, MARCH 22, 2020 by calling the office at 800-248-8114****

2020-02-28T00:00:00+01:00 2020-02-28T00:00:00+01:00 /current-auction/viewbids/7184/6903-270

6903-270 Lot of seven saws. Four back saws including two by JACKSON, one by THE BAY STATE SAW CO., and one by SANDVIKEN No. 308 with bakelite handle and brass backing. The other three have steel backing. 10" to 14" in lengths. Plus two small handsaws including a 16" one with two split nuts but unmarked, and a 20" ATKINS "Rex" with some chips on horns and hanghole. And a KEEN KUTTER keyhole saw. Surface rust on a few, handles have wear but horns generally ok. Good (COL303) 40 - 80 ****Bids with an asterix in front of the lot number have minimum bid of $1, all others have minimum bid of $20. ALL INITIAL BIDS MUST BE PLACED BY END OF DAY SATURDAY, MARCH 21, 2020. Bids may be raised or high bids obtained until 10pm EST Sunday, MARCH 22, 2020 by calling the office at 800-248-8114****

2020-02-28T00:00:00+01:00 2020-02-28T00:00:00+01:00 /current-auction/viewbids/7183/6903-269

6903-269 Lot of five back saws. All steel backed. Four mitres including two by DISSTON, 22" and 25-1/2", and two by ATKINS including a 26" one made for STANLEY and a 24" one marked with partially legible etch that says "Marsh Miter & Picture Frame." Plus a 14" DISSTON. All have some wear and a couple have chips to handle horns, spots of rust on a few. Good (COL302) 40 - 80 ****Bids with an asterix in front of the lot number have minimum bid of $1, all others have minimum bid of $20. ALL INITIAL BIDS MUST BE PLACED BY END OF DAY SATURDAY, MARCH 21, 2020. Bids may be raised or high bids obtained until 10pm EST Sunday, MARCH 22, 2020 by calling the office at 800-248-8114****

2020-02-28T00:00:00+01:00 2020-02-28T00:00:00+01:00 /current-auction/viewbids/6999/6903-136

*6903-136 Stair saw. 6" blade, applewood handle, good horns with some light dinging. Good (SWR154) 25 - 50 ****Bids with an asterix in front of the lot number have minimum bid of $1, all others have minimum bid of $20. ALL INITIAL BIDS MUST BE PLACED BY END OF DAY SATURDAY, MARCH 21, 2020. Bids may be raised or high bids obtained until 10pm EST Sunday, MARCH 22, 2020 by calling the office at 800-248-8114****

2020-02-28T00:00:00+01:00 2020-02-28T00:00:00+01:00 /current-auction/viewbids/6964/6903-101

*6903-101 Lot of 6 saw sets. Makers include STANLEY (No. 442), DISSTON (Triumph), STEARNS (Taintor Patent), BERGMAN O'BUFFALO, and SANDVIK, and one marked only Made in USA. Variety of conditions, a few have surface rust. Good (SWR413) 30 - 60 ****Bids with an asterix in front of the lot number have minimum bid of $1, all others have minimum bid of $20. ALL INITIAL BIDS MUST BE PLACED BY END OF DAY SATURDAY, MARCH 21, 2020. Bids may be raised or high bids obtained until 10pm EST Sunday, MARCH 22, 2020 by calling the office at 800-248-8114****

2019-12-12T00:00:00+01:00 2019-12-12T00:00:00+01:00 /current-auction/viewbids/6764/6902-304

*6902-304 Lot of three saw sets. An OVB, a TAINTOR'S, and a STEARNS. Stearns is super clean, other two have about 60-70% plating and some surface rust spots. Good- & better (RRT) 25 - 50 **LOTS WITH ASTERISK (*) HAVE $1 MINIMUM BID, ALL THE REST HAVE $20 MINIMUM BID. INITIAL ABSENTEE BIDS MUST BE PLACED BY END OF DAY, SATURDAY, JANUARY 4th. BIDS MAY BE RAISED OR HIGH BIDS OBTAINED UNTIL 10PM EST, SUNDAY, JANUARY 5th BY CALLING (800) 964-9036. AUCTION ENDS 10PM EST, SUNDAY, JANUARY 5th.**

2019-12-12T00:00:00+01:00 2019-12-12T00:00:00+01:00 /current-auction/viewbids/6754/6902-294

6902-294 SARGENT & CO. No. 153 saw vise. Clean with grey repainted japanning, Wentworth improved type, decent shape. Good (GRY12) 30 - 60 **LOTS WITH ASTERISK (*) HAVE $1 MINIMUM BID, ALL THE REST HAVE $20 MINIMUM BID. INITIAL ABSENTEE BIDS MUST BE PLACED BY END OF DAY, SATURDAY, JANUARY 4th. BIDS MAY BE RAISED OR HIGH BIDS OBTAINED UNTIL 10PM EST, SUNDAY, JANUARY 5th BY CALLING (800) 964-9036. AUCTION ENDS 10PM EST, SUNDAY, JANUARY 5th.**

2019-12-12T00:00:00+01:00 2019-12-12T00:00:00+01:00 /current-auction/viewbids/6748/6902-288

*6902-288 Wooden saw vise. Vise clamp with japanned cast iron holder at base, designed to clamp onto bench, with 12" wood jaws held together by thumbscrew. Unmarked. Good (RPT92) 20 - 40 **LOTS WITH ASTERISK (*) HAVE $1 MINIMUM BID, ALL THE REST HAVE $20 MINIMUM BID. INITIAL ABSENTEE BIDS MUST BE PLACED BY END OF DAY, SATURDAY, JANUARY 4th. BIDS MAY BE RAISED OR HIGH BIDS OBTAINED UNTIL 10PM EST, SUNDAY, JANUARY 5th BY CALLING (800) 964-9036. AUCTION ENDS 10PM EST, SUNDAY, JANUARY 5th.**

2019-12-12T00:00:00+01:00 2019-12-12T00:00:00+01:00 /current-auction/viewbids/6724/6902-264

6902-264 E.C. STEARNS saw tool No.1 IOB. Used to manually set teeth for timber saws. Tool very clean, box soiled with taped seams but complete, instruction sheet pasted in lid. Good+ (DJS640) 40 - 80 **LOTS WITH ASTERISK (*) HAVE $1 MINIMUM BID, ALL THE REST HAVE $20 MINIMUM BID. INITIAL ABSENTEE BIDS MUST BE PLACED BY END OF DAY, SATURDAY, JANUARY 4th. BIDS MAY BE RAISED OR HIGH BIDS OBTAINED UNTIL 10PM EST, SUNDAY, JANUARY 5th BY CALLING (800) 964-9036. AUCTION ENDS 10PM EST, SUNDAY, JANUARY 5th.**