Fine Tool Journal Here comes my RSS info https://finetooljournal.net/ 2019-12-06T20:11:35+01:00 FeedCreator 1.7.3 6901-413 2019-08-23T00:00:00+01:00 2019-08-23T00:00:00+01:00 /current-auction/viewbids/6449/6901-413 6901-413 Lot of two Gellman patent "Polly" wrenches. The uncommon quick adjust wrench, patented in 1923 by Israel Gellman and manufactured in Rock Island, IL. Both are the 9" No. 901 model, one very clean, the other older and more worn but still working. Good & better (SWR403) 49 - 80 ~~ INITIAL BIDS must be placed by end of the day on Saturday, September 14, 2019. PLACED BIDS may be raised until 10PM EST on Sunday, September 15, 2019 by calling (800) 964-9036. To see current high bid, please call (800) 964-9036 between 10am-5pm EST as we also get bids via phone, mail, and fax ~~ 6901-412 2019-08-23T00:00:00+01:00 2019-08-23T00:00:00+01:00 /current-auction/viewbids/6448/6901-412 6901-412 Lot of three patented wrenches. Morrill's 1907 buggy wrench, manufactured by DAYTON MALLEABLE IRON CO., 7-1/2" long; a HELLER BROS. quick adjusting "Masterench" based on Mead's patent (Schulz #328), 10", some pitting; and an "Adjust-A-Box" based on Neff's 1959 patent, not marked with the maker, 8", slight loss of nickel. Good & better (SWR402) 60 - 120 ~~ INITIAL BIDS must be placed by end of the day on Saturday, September 14, 2019. PLACED BIDS may be raised until 10PM EST on Sunday, September 15, 2019 by calling (800) 964-9036. To see current high bid, please call (800) 964-9036 between 10am-5pm EST as we also get bids via phone, mail, and fax ~~ 6901-409 2019-08-23T00:00:00+01:00 2019-08-23T00:00:00+01:00 /current-auction/viewbids/6445/6901-409 6901-409 Lot of three adjustable wrenches. A "Wizard No. 9" patented in 1922 and manufactured by WAKEFIELD WRENCH CO. of Worcester, MA, 9"; a "Sterling No. 1" bicycle wrench by MOSSBERG, 5", jaws a little spalled; and a FORD wrench, 9", some pitting. Good & better (SWR405) 40 - 80 ~~ INITIAL BIDS must be placed by end of the day on Saturday, September 14, 2019. PLACED BIDS may be raised until 10PM EST on Sunday, September 15, 2019 by calling (800) 964-9036. To see current high bid, please call (800) 964-9036 between 10am-5pm EST as we also get bids via phone, mail, and fax ~~ 6901-408 2019-08-23T00:00:00+01:00 2019-08-23T00:00:00+01:00 /current-auction/viewbids/6444/6901-408 6901-408 Lot of three large adjustable nut wrenches. One marked "Diamond Forged" with horseshow trademark, also marked "SPTCO/SSWRY", 18"; a BEMIS & CALL 18", steel handle, and one that appears to be marked "DUNDEE" but is pretty rusty, 22". Good (SWR407) 40 - 80 ~~ INITIAL BIDS must be placed by end of the day on Saturday, September 14, 2019. PLACED BIDS may be raised until 10PM EST on Sunday, September 15, 2019 by calling (800) 964-9036. To see current high bid, please call (800) 964-9036 between 10am-5pm EST as we also get bids via phone, mail, and fax ~~ 6901-407 2019-08-23T00:00:00+01:00 2019-08-23T00:00:00+01:00 /current-auction/viewbids/6443/6901-407 6901-407 Lot of two construction wrenches. Both with 7/8" open end wrenches and spike on the other end to align holes. One is 17" long, green japanning, with a "VT" trademark that we've seen on railroad tools, the other is by WILLIAMS and marked "305", 11". Good+ (SWR404) 40 - 80 ~~ INITIAL BIDS must be placed by end of the day on Saturday, September 14, 2019. PLACED BIDS may be raised until 10PM EST on Sunday, September 15, 2019 by calling (800) 964-9036. To see current high bid, please call (800) 964-9036 between 10am-5pm EST as we also get bids via phone, mail, and fax ~~ 6901-406 2019-08-23T00:00:00+01:00 2019-08-23T00:00:00+01:00 /current-auction/viewbids/6442/6901-406 6901-406 Lot of two pipe wrenches. A 14" "Perfect Handle" by H.D. Smith, and a 10" Stillson patent by WALWORTH MFG. CO. of Boston. Good & better (SWR401) 50 - 100 ~~ INITIAL BIDS must be placed by end of the day on Saturday, September 14, 2019. PLACED BIDS may be raised until 10PM EST on Sunday, September 15, 2019 by calling (800) 964-9036. To see current high bid, please call (800) 964-9036 between 10am-5pm EST as we also get bids via phone, mail, and fax ~~ 6804-272 2019-05-23T05:00:00+01:00 2019-05-23T05:00:00+01:00 /current-auction/viewbids/4814/6804-272 6804-272 Lot of four wrenches. Two bicycle wrenches with jaws that are closed by turning the handle, an example of GENDRON'S 1892 patent with the "Diamond G" mark and an unmarked example with double jaws. A 6" example of CARLL'S 1913 patent combination nut and pipe wrench with the reversible jaw (Schulz #568) as manufactured by M.W. ROBINSON of New York. And an example of what appears to be WHEATON'S 1918 self-closing faucet wrench although the marking is faint. Good better (MAG155.161,162,163) 60-120 NOTE: Initial bids accepted until 5pm EST Saturday, June 15. Bids may be raised by phone until 10pm EST on Sunday, June 16. 6804-270 2019-05-23T05:00:00+01:00 2019-05-23T05:00:00+01:00 /current-auction/viewbids/4812/6804-270 6804-270 Quick adjust combination wrench. One side marked with W. C. WYNN CO mark and other side has mark that looks like "Nath Mills", some surface rust, handle opens to allow jaw to quickly slide, has hammer on other side of jaws, pry bar on end of one handle. Good (WOL896) 30-60 NOTE: Initial bids accepted until 5pm EST Saturday, June 15. Bids may be raised by phone until 10pm EST on Sunday, June 16. 6804-269 2019-05-23T05:00:00+01:00 2019-05-23T05:00:00+01:00 /current-auction/viewbids/4811/6804-269 6804-269 North East ignition wrench. At least that's what it says on one of the parts. Some type of adjustable ratchet with several different types of blades or points that can be inserted in it. Made in India, probably not that old, and mint in its original wooden box. Fine (SAN254) 20-40 NOTE: Initial bids accepted until 5pm EST Saturday, June 15. Bids may be raised by phone until 10pm EST on Sunday, June 16. 6804-268 2019-05-23T05:00:00+01:00 2019-05-23T05:00:00+01:00 /current-auction/viewbids/4810/6804-268 6804-268 Lot of two pipe wrenches. A 14" STILLSON, manufactured by WALWORTH MFG CO., with a wooden handle and a notched wheel mounted on the end marked with a 2/14/99 patent date that we haven't seen before. And a 9" model based on COCHRAN'S 1908 patent and marked "Model 1910." Both in decent clean working condition. Good+ (MAG149,165) 60-120 NOTE: Initial bids accepted until 5pm EST Saturday, June 15. Bids may be raised by phone until 10pm EST on Sunday, June 16. 6804-267 2019-05-23T05:00:00+01:00 2019-05-23T05:00:00+01:00 /current-auction/viewbids/4809/6804-267 6804-267 Lot of four self-adjusting wrenches. A 10" "Auto-Grip" manufactured by CLEVELAND WRENCH CO., a 9" example of LITTLE'S 1912 patent (Schulz # 339) manufactured by LITTLES AUTOMATIC WRENCH CO. of Cresson, PA, a CROMNA No. S-3, manufactured in Sweden and marked with what is presumably a Swedish patent number, and an unmarked 9" model made of flat steel stock. All work smoothly and in good or better condition. Good better (MAG145,150,156,160.) 80-140 NOTE: Initial bids accepted until 5pm EST Saturday, June 15. Bids may be raised by phone until 10pm EST on Sunday, June 16. 6803-344 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4501/6803-344 6803-344 Buggy wrench. Unmarked but frequently attributed to Millers Falls, 8" long with adjusting thumbscrew at base and side knob. Traces of nickel plating. Good (AED68) 35 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-343 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4500/6803-343 *6803-343 Turpentine or sap scribe. Handforged from single square rod with loop and one end and other end is a sharp curve similar to a race knife, 16" long total. Some surface rust. Good (LHD 176) 10 - 20 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-342 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4499/6803-342 6803-342 Lot of three saw sets. One by MORRILL, one that is a Morrill type, and a DISSTON Monarch No. 2. All have some discoloration and surface rust. Good (WLS218) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-341 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4498/6803-341 6803-341 WIZARD ratcheting adjustable wrench. Patented in 1907 and manufactured by RICHARDS MFG. CO. of Aurora, IL. Double screw crescent type adjustment on ratcheting head. Some surface discoloration and light corrosion but good overall condition; works smoothly and clearly marked. Good (FNK525) 40 - 80 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-340 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4497/6803-340 *6803-340 Grafting froe. Nearly 7" long, handforged, spike on one end and cutting edge on other, both have spalling at top. Good (RSH 549) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-339 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4496/6803-339 *6803-339 Combination wrench. Unmarked with crescent head and rotating brass and bakelite pen shaped item inside the body. Point at one end of pen appears broken off. Good (PLH763) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-338 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4495/6803-338 6803-338 MITCHELL patent buggy wrench. 12" long. Unmarked except for patent date of 5/22/77 which belongs to Joseph Mitchell and manufactured by Bowker Tripp of New Bedford, MA (Schulz #211). A central screw on the handle closes the jaws, with a parallel rod to keep them aligned. Wood handle has a few scratches and one chip, metal has some discoloration and hardened grease. Good (RSH551) 50 - 100 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-337 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4494/6803-337 6803-337 Lot of two ratcheting wrenches. A FORD No. 5-Z-324 used for Model A and T transmission bands, some rust and green paint. And a WALDEN-WORCESTER No. 3119 refrigerator wrench circa 1920s-30s, a little dirty but in good shape. Good (AED 66) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-336 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4493/6803-336 *6803-336 Lot of two iron tools. A traveller with offset metal handle, 5-1/4" wheel. And a corner brace bit attachment with ball joint, unmarked. Both rusty but bit brace attachment more so. Good (PLH 777) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-335 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4492/6803-335 *6803-335 Lot of two blacksmithing tongs. Flat tongs, hand forged, with decorative stripes and dots inside mouth. And a pair of small snips marked A.F. CO., Germany. Good (RSH560) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-334 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4491/6803-334 *6803-334 Lot of two monkey wrenches. An ACME with corkscrew handle, 9", patented by F.B. SEYMOUR, Detroit, MI. And a 5-1/2" long one with open twist handle patented by VANDEGRIFT of Shelbyville, IN. Both fairly clean with some dinging. Good (AED67) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-333 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4490/6803-333 6803-333 Lot of two double ended wrenches. One unmarked and other is a BENESH patent Hawkeye "Maritime Farmer" combination wrench with screwdriver, thread cleaners, and alligator jaws. Maritime Farmer was a Sussex, New Brunswick farm dairy cooperative. Traces of surface rust on both. Good (AED69) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-332 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4489/6803-332 6803-332 Lot of three wrenches. A 13" long center nut pipe wrench by SAM'L HALL'S SON with ruling on side of mouth and slightly dinged jaws. A 12" sliding jaw one marked "Made in Germany" that slides the lower jaw by closing the handles. And a 7" GORDON automatic with side button that lowers bottom jaw. All have some surface rust. Good (PLH 749,769,770) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-331 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4488/6803-331 *6803-331 Clamp wrench. Presumably used in plumbing, cast iron body, 5" wide adjustable pipe clamp on one end, open end wrench on other, marked "XL 813". Rusty. Good (CRT 113) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST.