Fine Tool Journal Here comes my RSS info 2021-01-27T15:55:50+01:00 FeedCreator 1.7.3 7002-369 2021-01-06T11:04:00+01:00 2021-01-06T11:04:00+01:00 /current-auction/viewbids/9221/7002-369 * 7002-369. Lot of two MILLERS FALLS hand drills. A No. 94 with red japanning and three jaw chuck, other looks like a No. 1 with two jaw chuck and early frame, finish 60% and three bits in head. Good 25-50 7002-368 2021-01-06T11:05:00+01:00 2021-01-06T11:05:00+01:00 /current-auction/viewbids/9220/7002-368 * 7002-368. Lot of two breast drills. A NORTH BROS. Yankee No. 1555, partial decal on frame, finish 85%, three jaw chuck, some wear to wood handles. And a smaller one marked GERMANY, 12" long, green paint ok, japanning 85%, some rust on stem, three jaw chuck. Good 30-60 7002-367 2021-01-06T11:06:00+01:00 2021-01-06T11:06:00+01:00 /current-auction/viewbids/9219/7002-367 * 7002-367. Lot of two MILLERS FALLS breast drills. A No. 12, finish 80%, vial wet, two jaw chuck. And a No. 10, also two jaw chuck, finish 95% and partial decal on drive wheel. Both have light wear to handles and some rust spots. Good 30-60 7002-366 2021-01-06T11:07:00+01:00 2021-01-06T11:07:00+01:00 /current-auction/viewbids/9218/7002-366 * 7002-366. Lot of five hand drills. All with three-jaw chucks. Three are MILLERS FALLS No. 5, paint mostly gone and wear to wood, one of them has a couple bits in the handle. Plus a 9" GOODELL-PRATT, no bits, japanning 75%, and a FORSBERG MFG CO. W-790 with whale mark on handle, finish 80%, wear to wood, 5 bits in handle. All have some spots of rust. Good- & better 30-60 7002-364 2021-01-06T11:09:00+01:00 2021-01-06T11:09:00+01:00 /current-auction/viewbids/9216/7002-364 7002-364. Reciprocating drill. Unmarked but looks manufactured, working the handle like a pump causes the blade to spin back and forth. 16" including bit, cast iron with good japanning. Good 40-80 7002-363 2021-01-06T11:10:00+01:00 2021-01-06T11:10:00+01:00 /current-auction/viewbids/9215/7002-363 7002-363. Lot of two MILLERS FALLS "Buck Rogers" tools. A No. 1120 "Plane-R-File", some dinging to gray paint but overall clean with 90% intact decal; and a No. 104 hand drill with six drill stored in the handle, finish intact. Good+ 60-120 7002-355 2021-01-06T11:18:00+01:00 2021-01-06T11:18:00+01:00 /current-auction/viewbids/9207/7002-355 7002-355. Reciprocating drill. Not marked but something this weird has to have been manufactured and probably patented. The handles operate with a scissors action to rotate the chuck, which is locked with a side lever. Brass and steel with beech handles, 11-1/2" long. Only one we've ever seen. Mechanism a little loose but works smoothly. Good+ 100-200 7002-190 2021-01-06T14:03:00+01:00 2021-01-06T14:03:00+01:00 /current-auction/viewbids/8992/7002-190 7002-190. Lot of two reciprocating screwdriver/drills. One by MILLERS FALLS, based on McCoy and Pratt's 11/20/94 patent, no blades or bits but works smoothly, plus an A.H. REID "Lightning" brace, grimy and with corrosion to the nickel but has its original blade. Good 50-100 7002-186 2021-01-06T14:07:00+01:00 2021-01-06T14:07:00+01:00 /current-auction/viewbids/8988/7002-186 7002-186. Hand drill. Unmarked and we're not familiar with it but looks manufactured. 16" long overall with steel handle and knob, single speed with idler wheel, three jaw chuck, 3-1/2" diameter steel drive wheel. There's a screw in the shaft the purpose of which is unclear, possibly for lubrication. Well made and different. Good 40-80 7002-183 2021-01-06T14:10:00+01:00 2021-01-06T14:10:00+01:00 /current-auction/viewbids/8985/7002-183 7002-183. RUSBY patent extendible drill. One of the most gimmicky of the breast drills with its extendible neck to fit into tight locations; early type with wooden handle, breast pad is missing as it almost always is but otherwise in good condition including often-broken sliding handle catch. Good 30-60 7001-306 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8669/7001-306 7001-306 GOODELL-PRATT hand cranked drill press. Bench mounted, 17" tall. Gears work smoothly, original brass G-P tag, japanning mostly intact (about 50% red on gear). Foot on bench clamp missing. Good (JMC343) 80 - 150 7001-305 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8668/7001-305 7001-305 GOODELL-PRATT hand cranked drill press. Bench mounted, 17" tall. Gears work smoothly, original brass G-P tag, japanning mostly intact (about 50% red on gear) Features an unusual built-in vise with spring-mounted jaws. Good+ (JMC343A) 120 - 240 7001-304 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8667/7001-304 7001-304 MILLERS FALLS chain drill attachment. Designed to be used with drills that didn't have integral chain drill; you loop the chain around the wood being drilled and it helped force the drill through the work. Typical worn condition but still works, two jaw chuck with chip. Good (COL159) 30 - 60 7001-302 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8665/7001-302 7001-302 Lot of two drills. A STANLEY No. 984 ratcheting corner brace, wood has fair amount of dinging but nickel is good and works smoothly, and a CRAFTSMAN aluminum eggbeater drill, plug for drill compartment has an internal chip and no bits. Good+ (JMC344) 80 - 150 7001-291 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8611/7001-291 7001-291 Chain drill attachment. Unmarked but clearly manufactured and probably patented, very gizmoish, designed to be chucked into a brace or drill, two different speeds, looks like part of the chuck is missing and pretty dirty. Different. Good- (RRT167) 50 - 100 7001-237 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8557/7001-237 7001-237 Lot of four drills. Two by MILLERS FALLS, a No. 1 with early frame and Pratt's chuck, grungy and worn but works smoothly, and a No. 5, rosewood handle with six bits. Plus a STANLEY No. 610 "Hundred Plus" and an unmarked with red japanned drive wheel, lacquered wood handle with two bits stored. All except the No. 1 are nice and clean. Good & better (MSV045) 80 - 150 7001-236 2020-09-01T00:00:00+01:00 2020-09-01T00:00:00+01:00 /current-auction/viewbids/8556/7001-236 7001-236 Lot of two FLOTT breast drills. Two speed drills by German firm FLOTT, speed is changed by moving the handle to a different spindle. One has its name plate but the side handle has been replaced by what looks like a gear shift knob, the other is missing its plate but has original handles. Japanning worn, buth work smoothly. Good (JMC340) 40 - 80 6904-221 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7552/6904-221 6904-221 Lot of two A.H. REID "lightning" braces. Both work smoothly with rosewood heads, one has original bit and locking ring, nickel decent. Good & better (TBI380,437) 60 - 120 6904-218 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7549/6904-218 6904-218 Lot of three drills. Two MILLERS FALLS hand drills, a No. 2 and a No. 5, both missing side handles but otherwise decent, the No. 5 has a set of five bits in the handle, and a DUNLAP two-speed breast drill, grimy but working. Good (GRY028) 50 - 100 6904-209 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7540/6904-209 6904-209 Lot of two jeweler's drills. Similar to the Whitney drills sold by Tower & Lyon but without pinstriping. 8" long, different chucks. Good+ (CBM890,893) 60 - 120 6904-208 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7539/6904-208 6904-208 Jeweler's drill. Resembles the Whitney drills sold by Tower & Lyon, but without the pinstriping. Japanning 50%. Good (HSS265) 30 - 60 6904-207 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7538/6904-207 6904-207 WHITNEY PATENT jeweler's drill. TOWER & LYON advertised these drills as the Whitney patent, but the patent date given is actually for a method of making drill bits. The drills are highly prized for their elaborate red and gold pinstriping, which on this example is 90% complete but faded. Good (CBM891) 60 - 120 6904-205 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7536/6904-205 6904-205 Lot of four eggbeater drills. A MILLERS FALLS No. 2, early type with egg-shaped side handle, and three GOODELL-PRATT'S, Nos. 4, 49 and 52. All at least good with intact gears, no bits. Good & better (CBM889) 80 - 150 6904-204 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7535/6904-204 6904-204 Breast drill. Not marked but clearly manufactured and looks familiar, two speed with sliding drill, tubular body, super clean. Fine (HSS257) 50 - 100 6904-203 2020-05-26T00:00:00+01:00 2020-05-26T00:00:00+01:00 /current-auction/viewbids/7534/6904-203 *6904-203 GOODELL-PRATT No. 1616 hand drill. Red paint and decal are about 90%, nickel plating and japanning mostly intact. Chuck jaws are out of alignment. Good- (KNT046) 20 - 40