Fine Tool Journal Here comes my RSS info https://finetooljournal.net/ 2019-03-19T02:42:07+01:00 FeedCreator 1.7.3 6803-217 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4374/6803-217 6803-217 Lot of two slicks. A 3" GREENLEE with turned 15" handle, lightly cleaned. And an unmarked 3-1/2" edge and carved 7-1/2" handle, spots of surface rust. Good (RRT781) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-216 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4373/6803-216 6803-216 BEATTY No. 2 meat cleaver. Cow mark, 9" edge, some spalling on top of body, handle highly worn and chipped. Surface rust. Good (CBY34) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-215 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4372/6803-215 *6803-215 KEEN KUTTER No. 5 axe. 4-1/2" blade, sharpened on both sides, large chip in 31" handle near head. Good (HBE10) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-214 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4371/6803-214 6803-214 Lot of two slicks. One is BARTON with 3" edge and 12" turned handle, user initials on backside and spots of rust. And an unmarked one with 3" pitted edge, turned 15" handle. Good (CVR641) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-213 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4370/6803-213 *6803-213 J. BEATTY adze. 3-1/4" edge with chip in corner. 26" curved handle with P R stamped large on it. Spots of rust. (CBY23) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-212 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4369/6803-212 *6803-212 WM BEATTY SONS shipwright's adze. 4-1/2" edge with heavy pitting. 2-1/2" poll, and 25" curved handle is a little loose, some wear. Good- (CBY7) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-211 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4368/6803-211 6803-211 Bark spud. Unmarked, hook tip, lightly worn handle secured with screw through end of body. Slight rust. Good (CVR) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-210 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4367/6803-210 6803-210 OSBORNE draw gauge. Brass and rosewood handle, no cutter, some spots of surface rust. Good- (RRT101) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-209 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4366/6803-209 6803-209 Lot of two slicks. One OHIO TOOL CO. with 4" blade and highly worn handle with hanghole, surface rust. Other with 3" edge, mark to faint to read, long turned handle has duct tape and residue where handle and body meet. Good- better (SPM486) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-208 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4365/6803-208 6803-208 A.J. WILKINSON folding handle draw knife. 8" blade, light pitting. 75% nickel plating, handles clean. Good (TBI523) 35 - 70 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-207 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4364/6803-207 6803-207 Lot of two W. BEATTY slicks. 3" end with chip and 2-1/2" with semicircle mark and strike ring. Neither have any major pitting on backsides, wood handles ok but chip near end of smaller edge one. Good (CBY57,62) 40 - 80 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-206 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4363/6803-206 6803-206 Grafting froe. Made from a file with 4-1/2 inch edges on both sides with a double hook on one end that rotates presumably to allow for anchoring the body during cuts. Looks user or smith made, wood handle with hammered iron ferrule. Good (LDZ223) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-205 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4362/6803-205 6803-205 THOS. IBBOTSON gooseneck mortise chisel. Sharp 1/2" edge, lightly worn handle, mild rust. Good (GFR) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-204 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4361/6803-204 *6803-204 Lot of two turnscrews. Both unsigned. One graceful English style, 16" long, beech handle with brass ferrule, and 23" long one with bulbous handle. Good (SPM89,88) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-203 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4360/6803-203 *6803-203 Stair saw. Faint stamp but looks like the Disston inchworm mark. Unmarked blade has a little bit of life left, wood worn and user initials painted on one side. Good- (TWR324) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-202 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4359/6803-202 6803-202 WM BEATTY slick. 3" edge with surface rust and mild pitting, "WM. BEATTY CAST STEEL" mark, handle looks primitive and highly worn with chips at ends. Good (CBY15) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-201 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4358/6803-201 6803-201 Lot of two WM BEATTY drawshaves. Both 11" edges with cow marks, One has replaced handle and slightly curved edge, wear and staining to all handles. Edges sharp with mild rust. Good (CBY36) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-200 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4357/6803-200 *6803-200 Lot of two scorps. Open one by BLECKMANN, likely German, with curved 4-1/2 inch edge and handles split, pitting. Other is unmarked closed bodied one with straight 4-3/4" edge, split ferrule and 7-1/2" handle. Good- better (BEN114) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-199 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4356/6803-199 *6803-199 Lot of two WM. BEATTY drawshaves. 8" and 10" edges with cow marks, one with brass ferrules and decent handles, other has worn handles. A few nicks on both edges, a couple spots of pitting. Good- better (CBY38,39) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-198 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4355/6803-198 *6803-198 Lot of three hatchets. One by PASSAIC TOOL CO., Newark, NJ, and two by EVANSVILLE TOOL CO., including one with fox logo. Handles have wear and some spots of surface rust. Good (ALV519,638,655) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-197 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4354/6803-197 *6803-197 Lot of three tools. Two rasps, one by NICHOLSON and other HICKORY. And a hacksaw with black japanned body and traces of gold paint on a few stars cast into body, 9-1/2" blade. All three have cast iron hollow handles. (ASY68,73) 15 - 30 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-193 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4350/6803-193 *6803-193 JENNINGS patent folding handle drawknife. 8" edge, metal has some pitting and rust, handles have light wear and are locked by knurled wheels at top. Good (A No. 7 with 26-1/2" blade and faint etch, horns have some chipping and wear, nib broken off. What looks like a D-8 but 26 inch blade rusty and has only a little life left, top horn broken off. And a D-7, clean and looks barely used with original store tag stil on it. ) 20 - 40 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-139 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4296/6803-139 *6803-139 Lot of two hoop drivers. One is all wood with a strike ring at end of handle, marked "Bigelow." Other has iron head that looks handforged with wood handle and strike ring, marked "Sloan." Light wear on both. Good (SPM684,815) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-138 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4295/6803-138 6803-138 BRACHT closed scorp. 3" wide head marked "Made in West Germany" with grey stained turned handle and most of original decal. Clean and ready to use. Good+ (MDY) 30 - 60 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST. 6803-137 2019-02-19T00:00:00+01:00 2019-02-19T00:00:00+01:00 /current-auction/viewbids/4294/6803-137 *6803-137 JENNINGS folding drawknife. 12" edge, good edge protected by masking tape, marked with 2/20/06 patent date. Handles are well-made replacements. A nice user. Good (RRT) 25 - 50 NOTE: All initial bids must be submitted by end of day Saturday, March 9, 2019. Bids may be raised by calling (800) 248-8114 on Sunday, March 10, 2019 until 10PM EST.